Revision [20859]
This is an old revision of FCA1616 made by ToBo on 2015-02-24 13:50:04.
Behringer Firepower FCA1616
Product page
http://www.behringer.com/EN/Products/FCA1616.aspx
1. Technical data
- Supported sample rates are 44.1 kHz, 48 kHz, 88.2 KHz and 96 kHz
- Supported digital audio formats
- SPDIF S/PDIF, 2 channels
- ADAT S/MUX, 4 channels
- ADAT, 8 channels
- Requires FireWire standard IEEE 1394a-2000, alias FireWire 400, 6-pole cable
2. Used components
- Archwave DM1500 (heart of the FCA1616)
- Datasheet
- Prowides Firewire IEEE1394, USB 2.0, ADAT, SPDIF S/PDIF, MIDI interface
- Digital Mixer for level meter, volume and balance/panning functions (DSP)
- Offers GPIOs
- 8 used A/D converters, 24-bit
- 8 used D/A converters, 24-bit
- Audio channels: There are different generic and customizable versions of this chip. DM1500E works only at 88.2 KHz or 96 kHz rate providing up to 64 channels over IEEE 1394 and up to 34 channels over USB 2.0.
- Can sample rates from 44.1 kHz up to 192 kHz
- ARM processor + DSP
- Cirrus Logic CS42435 only for sample rate conversion??
- Product website
- This IC has own ADC/DAC but I believe it is used to provide the other two supported sample rates at 44.1 kHz and 48 kHz
- 4 x 24-bit A/D converters
- 8 x 24-bit D/A converters
- BeOpAmps 4580R op-amps for the MIDAS pre-amps
- MIDAS design pre-amps where Uli Behringer is also CEO
- RC4850 pin and Function Compatible With LM833, NE5532, NJM4558/9, and NJM4560/2/5
3. Test reports
I fond this usefull.
https://www.gearslutz.com/board/product-alerts-older-than-2-months/691580-behringer-fca1616-4.html
Siehe auch •
